Cabin & comfort Official source verified
Link a Saved RX Driving Position to One Electronic Key
Pair a memory-button position with one key so the RX recalls that driver's seat and mirror setup at entry.
Cabin setup
Driver & seat memory
Memory buttons, key-linked recall and software profiles are related but not always the same feature. Each guide identifies the control and equipment covered by its source.
76 verified guides 63 model families 28 makes
Verified applicability
More verified guides — page 2
Each guide keeps its market, model-year, powertrain and equipment limits attached. A listed model does not imply the feature is standard on every trim.
Cargo & utility Official source verified
Save and Reset the RX Liftgate Opening Height
Store a lower liftgate stop with a two-second hold and restore the initial height with a seven-second hold.
Cabin & comfort Official source verified
Save and Recall an RZ Driving Position
Store the seat, steering wheel, mirrors and available head-up display under one of three memory buttons.
Cargo & utility Official source verified
Save a Lower Lexus TX Liftgate Opening Height
Store a garage-safe liftgate stop with a two-second button hold and restore default with a seven-second hold.
Cabin & comfort Official source verified
Save and Recall a Lexus TX Luxury Driving Position
Store seat, steering-wheel, mirror and available head-up-display positions in one of three memory slots.
Cabin & comfort Official source verified
Save Three Seat, Mirror and Steering-Column Positions
The 2024 Corsair memory buttons can store three driver-seat and mirror positions plus the power steering-column position when equipped.
Driver memory Official source verified
Link Driver Position Settings to the Key Fob
Make an equipped 2024 GranTurismo Modena recall its stored driver position through the linked fob setting.
Cabin & comfort Official source verified
Link a Driving Position to a Mazda3 Key
Save the seat, Active Driving Display and outside-mirror positions to a transmitter by pressing its Unlock button within five seconds of the SET tone.
Cargo & utility Official source verified
Save a Lower CX-30 Liftgate Height
Stop the gate above halfway and hold its close switch for three seconds; two beeps store the new ceiling-safe height.
Cargo & utility Official source verified
Save a Lower Power-Liftgate Opening Height
Stop the liftgate above halfway and hold its close switch for three seconds to save clearance for a low garage.
Suspension Official source verified
Raise the Front Axle and Save the Location
Lift the nose for a driveway or ramp and optionally store that GPS position for automatic future raising.
Cabin & comfort Official source verified
Store and Recall the Driver's Memory Position
Save supported seating, steering, mirror and head-up-display adjustments to preset 1, 2 or 3.
Cabin & comfort Official source verified
Store and Recall a Driving Position
Save supported seat, steering, mirror and head-up-display settings to one of three memory buttons.
Cabin & comfort Official source verified
Store and Recall an EQE Memory Position
Save supported seat contour, steering, mirrors, head-up display and seat-heating distribution for up to three people.
Cabin & comfort Official source verified
Store and Recall a Seat Memory Position
Save supported seat, steering wheel, mirror and head-up-display positions to one of three door presets.
Cabin & comfort Official source verified
Link Outlander Seat and Mirror Memory to a Key
Enable Key-Linked Settings with one transmitter present so that key recalls its driver's-seat and outside-mirror position.
Cargo & utility Official source verified
Set the ARIYA Power Liftgate Garage Height
Hold the open liftgate at a safe height and save that position so it clears a low garage ceiling on future openings.
Comfort & convenience Official source verified
Store an Armada Driver Memory Position
Save the driver's seat, power steering column and outside-mirror positions to memory button 1 or 2, then optionally link the position to a key.
Cabin & comfort Official source verified
Link a Driver Profile and Memory Position to an Intelligent Key
Pair one Platinum driver profile with one Intelligent Key so seat, steering-wheel and mirror settings return for that driver.
Cargo & utility Official source verified
Program a Lower Pathfinder Liftgate Height
Hold the open liftgate at a chosen height and save it with the liftgate switch until two beeps sound.
Cargo & utility Official source verified
Set a Lower Power-Liftgate Opening Height
Move the open liftgate to a safe custom height and save that position with the liftgate switch.
Cabin & comfort Official source verified
Store a Driver Seat and Mirror Memory Position
Save the adjusted seat and outside-mirror positions to memory button 1 or 2, then recall them with one press.
Cabin & comfort Official source verified
Register a DriverFocus Profile With Seat Memory
Save a facial profile, seat position and mirror position so the Ascent can recall them for the recognized driver.
Cargo & utility Official source verified
Set a Lower Power Rear Gate Opening Height
Stop the gate at a safe garage or reach height, save that position, and confirm Power Rear Gate Memory is enabled.
Cabin & comfort Official source verified
Link Seat and Mirror Memory to Each Key Fob
Assign a preferred driver-seat and mirror position to a specific access key so it recalls when that driver opens the door.
Lighting & visibility Official source verified
Save a Custom Reverse-Tilt Mirror Angle
Set the passenger mirror to your preferred curb-view angle in Reverse and save it with driver memory.
Cabin & comfort Official source verified
Create a Driver Profile and Easy Entry Setup
Save seat, steering, mirror and compatible preference settings for each driver.
Cargo & utility Official source verified
Save a Safer Liftgate Opening Height
Store a reduced trunk opening for low ceilings and clear saved locations when full height is needed again.
Cabin & comfort Official source verified
Create a Driver Profile and Easy Entry Position
Store seating, steering, mirror and supported preferences locally or in a Tesla account profile.
Cargo & utility Official source verified
Save a Lower 4Runner Hybrid Liftgate Opening Height
Stop the power liftgate at a safe height and store that position with its lower switch.
Cabin & comfort Official source verified
Save and Recall Camry Driving Position Memory
Store the driver seat, mirrors and available head-up display position under memory button 1 or 2.
Cargo & utility Official source verified
Set the Corolla Cross Power Back Door Opening Height
Save a lower liftgate stop position for a low garage or easier reach, then restore the default when needed.
Cabin & comfort Official source verified
Link Driver-Seat Memory to Each Smart Key
Make the driver’s seat recall a different saved position when each registered key opens the driver’s door.
Cargo & utility Official source verified
Save a Lower Power-Liftgate Opening Height
Teach the power back door a custom stop position for a low garage or easier reach.
Cargo & utility Official source verified
Teach the Sienna Power Liftgate a Lower Opening Height
Save a garage-safe liftgate stop with a two-second hold, or restore the initial height with a seven-second hold.
Cabin & comfort Official source verified
Save Three Driver Seat and Mirror Positions
Use SET and memory buttons 1, 2 or 3 to store separate driver-seat and exterior-mirror positions with an audible confirmation.
How to use this library
Confirm equipment before trying a procedure.
Open the matching vehicle guide and read its availability note first. When the retail trim or package is not named by the official source, use the window sticker, manufacturer build record or the visible control in the vehicle.