Save and Recall a Driver Memory Profile
Store the equipped Giulia's driver-seat and side-mirror positions under one of three memory buttons.
Memory buttons, key-linked recall and software profiles are related but not always the same feature. Each guide identifies the control and equipment covered by its source.
Each guide keeps its market, model-year, powertrain and equipment limits attached. A listed model does not imply the feature is standard on every trim.
Store the equipped Giulia's driver-seat and side-mirror positions under one of three memory buttons.
Store the equipped Stelvio's driver-seat and side-mirror positions in one of three profiles.
Adjust the supported driver controls, press SET and assign the position to a numbered memory button.
Select the passenger mirror, shift to Reverse and save a lower viewing angle so the mirror can show the curb during parking.
Adjust the supported driver controls, press SET and then a numbered memory key to store a reusable driving position.
Store two driver profiles plus an exit position and optionally enable automatic entry and exit recall.
Store two driver seat-and-mirror profiles, add an exit position, and enable automatic recall if desired.
Store separate driver profiles with the door-mounted SET and 1 or 2 buttons, plus an exit position when equipped.
Store the current position as Home so the Bolt EV can apply home charging preferences there and charge immediately when away.
Open the equipped liftgate by approaching with the fob and store a lower opening height for restricted overhead clearance.
Store two driver settings, create a separate exit position and link automatic entry and exit recall to vehicle settings.
Store two driver positions plus a separate easy-exit position, then enable automatic recall in the center display.
Store seat, mirror and radio preferences in memory 1 or 2 and optionally recall them from a linked key fob.
Store an equipped Durango's seat, mirrors, steering-column and radio preferences in memory position 1 or 2.
The 2024 Explorer keypad can store up to five personal entry codes without erasing the factory master code.
The 2024 Explorer can remember a reduced liftgate height for low garages or easier reach, and retains it after battery disconnection.
Let an equipped Explorer move the driver seat rearward after shutdown and return it at startup, or disable the motion.
Store the seat, steering wheel, mirrors and available head-up-display position in button 1 or 2.
Store the driver's seat, power steering wheel, mirrors and available head-up-display position in button 1 or 2.
Store seat, mirror, steering-wheel and head-up-display positions in memory button 1 or 2.
Store two driver seat-and-mirror positions plus an exit position and optionally enable automatic recall.
Move the open liftgate to a safe height, hold the latch-area button for confirmation and use the 3/4 setting to recall it.
Pair DRIVER 1 and DRIVER 2 remotes with their matching saved seat positions.
Move the liftgate to the preferred height, store it from the inner button and select User Height Setting in the display.
Store the adjusted driver seat and side mirrors in memory button 1 or 2 while the Santa Fe is on and in Park.
Save the driver's seat, outside mirrors and equipped power steering-column position to memory button 1 or 2.
Sign in to the intended profile, enable key synchronization and save the adjusted driving position with only that key in the QX60.
Adjust the driving position, press SET and choose memory button 1 or 2 within five seconds.
Lower the door mirrors automatically in Reverse and store up to three preferred curb-view angles.
Store the driver's seat, steering-column and mirror setup on a numbered memory button.
Store a powered-tailgate stop that fits beneath a low ceiling.
Store seat, mirror, steering-column and radio preferences in position 1 or 2 and optionally link a key fob.
Store a user height so the equipped Carnival's liftgate stops below an overhead obstacle or at an easier reach point.
A stored user height lets an equipped Sportage stop its liftgate at a chosen reach point or below a low ceiling.
Store a powered rear-seat position on one of the rear memory preset buttons.
Save a lower power-liftgate stop for a low garage or easier reach, then restore the factory height with a longer button hold.
Open the matching vehicle guide and read its availability note first. When the retail trim or package is not named by the official source, use the window sticker, manufacturer build record or the visible control in the vehicle.