Quick answer

On memory-equipped Outbacks, each access key can recall its own saved driver-seat and exterior-mirror position as the driver door opens.

Before you start

Check that your vehicle has it.

Availability

Standard two-position driver-seat and exterior-mirror memory on Limited, Limited XT, Touring and Touring XT for 2020-2025. Requires a registered access key fob.

Retail trim / version
Limited / Limited XT, Touring / Touring XT
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Standard two-position driver-seat and exterior-mirror memory on Limited, Limited XT, Touring and Touring XT for 2020-2025. Requires a registered access key fob.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Cabin & comfort orientation diagram for Subaru Outback
Cabin & comfort orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Park, shift to Park, apply the parking brake and switch the ignition off.

  2. 02

    Keep only the access key fob you want to register nearby, then adjust the driver seat and exterior mirrors.

  3. 03

    Press and hold the SET button on the driver door.

  4. 04

    While holding SET, press and hold the unlock button on that access key fob until one confirmation chirp sounds.

  5. 05

    Exit, close and lock the vehicle.

  6. 06

    Test with the registered fob by unlocking and opening the driver door; the seat and mirrors should recall the saved position.

!

Important limits

  • Keep hands, feet, passengers and cargo clear of the moving seat mechanism and do not drive until recall movement is complete.
  • Carry only the fob being registered; registration or recall may fail when two access keys are present.
  • Registering a new position to the same fob replaces its previous position.
If it does not work

Quick checks.

  • ✓If no chirp sounds, confirm the ignition is off, the selector is in Park and the parking brake is applied.
  • ✓Test the door memory buttons. If they work but fob recall does not, retry with the spare fob far away and check the selected fob battery.
  • ✓If seat movement stops, remove any obstruction and use the seat control to place it safely before registering again.
Owner feedback

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

Subaru Customer Support - Memory Power Seat and Mirrors

Relevant section or page: 2023 Getting Started Guide, pages 146-147. We use the written official source to determine the steps and applicability shown above.

View 2 supporting references
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.
Watch it in action Official manufacturer video

How to Program Your Subaru Vehicle's Memory Power Seat and Mirrors

Video by Subaru. 2020-2025 U.S.-market Outback models equipped with memory power seat and mirrors; 2020 Outback Touring shown. The written steps remain tied to the official source.

Video loads only after you press play.