Choose an ADX USB or Wireless Phone Charger
Use the front audio-capable USB-C port, charging-only ports or Qi pad for the device and seat position involved.
Phone pairing, CarPlay, Android Auto, multimedia shortcuts, connected services and vehicle apps.
Each guide keeps its market, model-year, powertrain and equipment limits attached. A listed model does not imply the feature is standard on every trim.
Use the front audio-capable USB-C port, charging-only ports or Qi pad for the device and seat position involved.
Connect the Advance trim's embedded Alexa service for voice navigation, media, calls and supported remote AcuraLink commands.
Touch the same relative spot on the pad as the item on the screen; the system uses absolute position mapping.
Select items on the 10.2-inch display by touching the corresponding position on its absolute-mapped dual-zone pad.
Position a compatible Qi phone correctly and interpret the equipped Stelvio charging-pad indicator.
Add a phone to the 2024 Stelvio Information and Entertainment system and choose it from the priority-device list.
Add a phone through the 2024 Tonale eAWD touchscreen Device Manager and recover from a failed pairing.
Select the linked A3 in myAudi, open Vehicle status report and refresh the online data before acting on a warning or service reminder.
Turn on the A3 hotspot in Connection settings, then join the network from the passenger device like a normal Wi-Fi network.
Open User Management as the A3 Key User, tap plus and invite the driver's myAudi email address.
Start a new external-device connection in MMI, confirm the matching PIN on both screens and verify the device appears in Connected devices.
Activate Personal eSIM through the My BMW App, sign into the same BMW ID in the car and enable internet access for mobile devices.
Complete carrier enrollment in the My BMW App, let the 7 Series download the profile and enable hotspot internet in iDrive.
Link a supported carrier line to the driver's BMW ID, let the X7 download it and turn on hotspot internet access.
Pair an equipped 124 Spider HomeLink button with a rolling-code opener using the required learn-button window.
Position a compatible phone correctly and interpret the 500e pad's status light.
Add a phone through the 500e touchscreen Device Manager and recover cleanly from a stalled pairing.
Connect a compatible appliance to the charge-port V2L adapter, start output at the adapter and disconnect it in the documented order.
Use the charge-port adapter as an AC outlet while preserving the battery reserve selected in the EV menu.
Inspect the inlet, seat the connector until it clicks and unlock the vehicle before removal when connector locking is active.
Place a compatible Qi phone upright and centered over the pad logo with the ignition on and all doors closed.
Increase low-speed axle articulation off road, then verify the stabilizer reconnects before normal road speed.
Set a battery-discharge floor, connect a compatible appliance to the V2L adapter and verify its green operating light before use.
The exterior Vehicle-to-Load connector can supply AC power from the traction battery until the EV9 reaches a driver-selected battery reserve.
Set a battery reserve, attach a compatible appliance to the equipped V2L adapter and verify its operating light before drawing AC power.
The equipped pad charges a centered Qi-compatible phone and uses amber, green and red indicator states to report its condition.
Center a compatible phone in the documented charging orientation and use the pad indicator to distinguish normal, fast and interrupted charging.
A centered compatible phone charges when the engine is operating, while the pad LED reports normal, fast, heat-obstructed or fault states.
Center a compatible phone on the equipped pad and use its indicator to verify normal or fast charging and identify heat or fault interruptions.
Use Remote Online to run the parked CLE for up to ten minutes after all vehicle conditions are satisfied.
Open Personal eSIM in the OS9 Mobile devices menu, synchronize the linked profile and select its connection mode and contacts.
An equipped Smartphone-Link Display Audio system can present supported phone apps through Apple CarPlay or Android Auto after the compatible phone is connected and permissions are approved.
The Mitsubishi Motors app can request the parked vehicle's location when the connected-services account, subscription, GPS and cellular connection are available.
Enable iPhone Wi-Fi and Bluetooth, start Apple CarPlay discovery in PCM Devices and approve the prompts on both screens.
Open Add New Account in PCM, scan its QR code with a phone and finish the Porsche ID and security-code login.
Open Privacy and Porsche Connect settings, set Privacy Mode inactive and confirm online services return.
Open the matching vehicle guide and read its availability note first. When the retail trim or package is not named by the official source, use the window sticker, manufacturer build record or the visible control in the vehicle.