Quick answer

Plug the device into a dry Hyundai V2L connector, insert the connector into the charge inlet within 60 seconds of opening the door, then press its power switch.

Before you start

Check that your vehicle has it.

Availability

Verified for the 2025 U.S.-market IONIQ 5 when equipped with Hyundai's exterior V2L connector; the adapter may be trim-dependent or an accessory.

Required equipment / service
IONIQ 5 vehicles equipped with the exterior Hyundai V2L connector
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • IONIQ 5 vehicles equipped with the exterior Hyundai V2L connector
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for the 2025 U.S.-market IONIQ 5 when equipped with Hyundai's exterior V2L connector; the adapter may be trim-dependent or an accessory.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Towing & power orientation diagram for Hyundai Ioniq 5
Towing & power orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Park in a dry, ventilated area and inspect the V2L connector, charge inlet, device plug and cable for damage or contamination.

  2. 02

    Open the V2L outlet cover, connect the appliance plug fully and close the cover completely.

  3. 03

    Open the connector terminal cap, open the vehicle charging door and insert the V2L connector within 60 seconds.

  4. 04

    Press the V2L connector power switch and confirm its indicator shows that AC power is being supplied.

  5. 05

    When finished, switch off the load and connector, unlock the doors, press the connector release and remove it before closing the charge door.

!

Important limits

  • Do not use damaged, wet, corroded or loosely connected V2L equipment.
  • Do not exceed the vehicle's supported output or use the supply for equipment that requires uninterrupted power, including medical devices.
If it does not work

Quick checks.

  • ✓If output stops immediately, reduce the connected load and check the cluster for an excessive-power warning.
  • ✓If the connector will not release, turn its power switch off, unlock the vehicle and then press the release rather than forcing it.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Hyundai IONIQ 5 Owner's Manual — Using Electricity Outside the Vehicle

We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.