Quick answer

Connect the appliance to a dry V2L connector, insert it into the IONIQ 6 charge inlet within 60 seconds and press the connector's power switch.

Before you start

Check that your vehicle has it.

Availability

Verified for the 2025 U.S.-market IONIQ 6 when equipped with the exterior V2L connector; hardware may be trim-dependent or an accessory.

Required equipment / service
IONIQ 6 vehicles equipped with the exterior Hyundai V2L connector
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • IONIQ 6 vehicles equipped with the exterior Hyundai V2L connector
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for the 2025 U.S.-market IONIQ 6 when equipped with the exterior V2L connector; hardware may be trim-dependent or an accessory.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Towing & power orientation diagram for Hyundai Ioniq 6
Towing & power orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Park in a dry area and inspect the adapter, inlet, appliance plug and cable before connecting anything.

  2. 02

    Plug the appliance fully into the V2L outlet and close the adapter cover.

  3. 03

    Open the adapter terminal cap, open the charging door and insert the V2L connector within 60 seconds.

  4. 04

    Press the connector power switch and verify that its indicator confirms output.

  5. 05

    Turn off the appliance and adapter, unlock the doors and press the connector release before removing it.

!

Important limits

  • Never connect wet, damaged, loose or corroded equipment.
  • Do not exceed the supported output or power equipment that requires an uninterrupted supply.
If it does not work

Quick checks.

  • ✓If power stops, disconnect high-draw devices and read the cluster message before restarting.
  • ✓If the connector remains locked, switch V2L off and unlock the vehicle before pressing the release.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Hyundai IONIQ 6 Owner's Manual — Using Electricity Outside the Vehicle

We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.