Quick answer

Set the V2L discharge floor, connect dry compatible equipment to the V2L adapter and confirm the adapter light before drawing power.

Before you start

Check that your vehicle has it.

Availability

Verified in the 2025 U.S.-market EV9 owner's manual. The exterior V2L adapter is equipment- and market-dependent and may be an accessory.

Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified in the 2025 U.S.-market EV9 owner's manual. The exterior V2L adapter is equipment- and market-dependent and may be an accessory.

  • 2025 EV9 Electric models equipped with the exterior V2L connector or adapter
Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Towing & power orientation diagram for Kia EV9
Towing & power orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Open Electric Vehicle settings and set the minimum battery percentage to retain for V2L use.

  2. 02

    Inspect the V2L adapter, charge inlet and grounded appliance plug; keep every connection dry and undamaged.

  3. 03

    Connect the appliance to the V2L outlet and close the outlet cover around its cord.

  4. 04

    Insert the V2L connector fully into the EV9 charging inlet, then press the connector switch.

  5. 05

    Confirm the operating light turns on before starting the appliance; switch V2L off before disconnecting.

!

Important limits

  • V2L stops at the selected reserve and can also stop because of overload or temperature protection.
  • Use only dry, undamaged, grounded equipment within the adapter's rated output; never handle it with wet hands.
  • V2L use reduces remaining range, and the vehicle cooling fan may start automatically.
If it does not work

Quick checks.

  • ✓If the light stays off, confirm the reserve is below the EV9's current state of charge.
  • ✓If output stops, disconnect high-demand devices and check the cluster for an overload or temperature message.
  • ✓If a known-compatible device also fails, stop using the adapter and have an authorized Kia dealer inspect it.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Kia EV9 Owner's Manual — Vehicle-to-Load

Relevant section or page: Electric vehicle guide — Vehicle-to-Load (V2L). We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.