Use Keyless Entry and Turn On Passive Locking
Unlock the 2025 Traverse from a door-handle button and enable automatic locking after the last door closes.
Key-fob shortcuts, passive entry, digital keys, locks, alarms and secure access features.
Each guide keeps its market, model-year, powertrain and equipment limits attached. A listed model does not imply the feature is standard on every trim.
Unlock the 2025 Traverse from a door-handle button and enable automatic locking after the last door closes.
Lock the 2025 Trax, hold the remote-start control and repeat the sequence for one additional 15-minute period.
Use the transmitter pocket behind the cupholders so the vehicle can detect a fob whose battery is too weak for normal operation.
Remove the key blade from the Trax fob, expose the concealed lock cylinder and unlock the driver door when electronic entry is unavailable.
Operate the door-handle switch with the fob nearby and configure the Trax to lock after the doors close.
Trigger an equipped power sliding door with a valid key nearby and a deliberate foot motion under its exterior handle area.
Open, close or reverse either equipped sliding door and disable rear power controls when manual operation is safer.
Start an equipped Voyager from the key fob, confirm the 15-minute cycle and take over before it times out.
Run an equipped 2025 Durango for one 15-minute remote-start cycle, then take over or cancel it correctly.
Use the exterior handle sensors while keeping the key fob in a pocket or bag.
Lock, unlock and open an equipped 124 Spider while its valid key fob remains in a pocket or bag.
Run the catalog's 2023 500X AWD variant for one 15-minute remote-start cycle and take over correctly.
Use the 2023 500X AWD exterior handles while the valid fob stays in a pocket or bag.
Use the 500e exterior handle while keeping the valid key fob in a pocket or bag.
The 2024 Explorer keypad can store up to five personal entry codes without erasing the factory master code.
With two programmed intelligent-access keys, the 2024 Explorer can briefly show its factory SecuriCode master code in the instrument cluster.
Use SecuriCode shortcuts to unlock all doors or lock the truck without first entering a code.
Vent a hot cabin by lowering the equipped power windows from the key fob.
Lock the Maverick, press the remote-start control twice and use the same control to end the secured session.
Use Track Apps to hold the front brakes for tire conditioning, following every readiness condition and the on-screen countdown.
Enable Remote Rev with an Unlock-then-Lock sequence and repeat it to command an equipped automatic-transmission Mustang to rev.
Lock touchscreen features with a four-digit code or generate temporary keypad and drive codes for a valet when using Phone as a Key.
Authorize the Mach-E in the Ford app, complete Phone as a Key setup and create the emergency backup start passcode.
Use the saved touchscreen passcode when neither an authorized phone nor the remote control is detected.
Start face recognition from the exterior handle sensor and use the camera's color ring to confirm authentication.
Store one fingerprint for a driver profile so the cabin sensor can authenticate protected profile functions.
Authenticate a compatible phone through the Genesis app and vehicle settings so it can unlock and authorize driving.
Enroll one face in a driver profile with both smart keys present so the exterior camera can authenticate entry.
Make one Unlock press open only the driver's door and a second press release the remaining doors.
Lock the GV70 and hold Remote Start within four seconds while staying inside the documented key range.
Register one card with both smart keys present and use it at the door handle and wireless authentication pad.
Lock the GV80 and hold Remote Start within four seconds, then enter with the registered key before shutdown.
Double-press Remote Start, drive after an in-cabin start and track the shared 30-minute remote-run allowance.
Unlock from the handle, enable passive locking in Settings and hold the interior lock switch to pause it for one cycle.
Start an equipped gasoline Canyon from the key fob, add another 15 minutes, or cancel the session.
Start the gasoline engine from the factory key fob, add the documented extension, or stop the remote session.
Open the matching vehicle guide and read its availability note first. When the retail trim or package is not named by the official source, use the window sticker, manufacturer build record or the visible control in the vehicle.