Quick answer

With the Pacifica in Park and the key fob within 5 ft, move a foot straight in-and-out, side-to-side or in a sweep beneath the activation zone below the sliding-door handle, then step clear.

Before you start

Check that your vehicle has it.

Availability

Verified for 2024 Pacifica vehicles equipped with Hands-Free Sliding Doors; operation requires Park and a nearby Passive Entry fob.

Required equipment / service
Pacifica equipped with Hands-Free Sliding Doors and Passive Entry
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • Pacifica equipped with Hands-Free Sliding Doors and Passive Entry
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for 2024 Pacifica vehicles equipped with Hands-Free Sliding Doors; operation requires Park and a nearby Passive Entry fob.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Key fob & access orientation diagram for Chrysler Pacifica
Key fob & access orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Place the transmission in Park and carry a valid Passive Entry key within 5 ft (1.5 m) of the target door.

  2. 02

    Confirm Hands-Free Sliding Doors is enabled in Uconnect settings.

  3. 03

    Move one foot beneath the vehicle in the activation zone below the sliding-door handle using a deliberate allowed motion.

  4. 04

    Withdraw your foot and body from the door path immediately.

  5. 05

    Wait for the warning tone and flashes, and monitor the entire powered movement.

!

Important limits

  • Keep people and objects clear of the powered door path.
  • Turn the feature off during jacking, tire service or vehicle service.
  • Repeated obstructions can cause the door to stop automatically.
If it does not work

Quick checks.

  • ✓Move the valid key within 5 ft of the door handle.
  • ✓Confirm the vehicle is in Park and the feature is enabled in Uconnect.
  • ✓If the door reverses or stops, remove the obstruction before trying again.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2024 Chrysler Pacifica Owner's Manual — Hands-Free Sliding Doors

Relevant section or page: Getting to Know Your Vehicle — Doors. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.