Quick answer

Use the backup slot and cycle the start button with the first key, then repeat with the second programmed key to display the five-digit master code.

Before you start

Check that your vehicle has it.

Availability

Verified for the 2024 U.S./Canada Ford Explorer with a keyless-entry keypad and two previously programmed intelligent-access keys.

Required equipment / service
SecuriCode and intelligent-access keys equipped
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • SecuriCode and intelligent-access keys equipped
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for the 2024 U.S./Canada Ford Explorer with a keyless-entry keypad and two previously programmed intelligent-access keys.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Key fob & access orientation diagram for Ford Explorer
Key fob & access orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Turn the Explorer off, close every door and keep your foot off the brake pedal.

  2. 02

    Place the first programmed intelligent-access key in the center-console backup slot.

  3. 03

    Press the push-button ignition once, wait a few seconds, press it again and remove the first key.

  4. 04

    Within the 30-second sequence, put the second programmed key in the backup slot and press the ignition button once.

  5. 05

    Read the five-digit master access code when it appears briefly in the instrument cluster.

!

Important limits

  • Both keys must already be programmed to the vehicle; an unprogrammed spare will not complete the sequence.
  • Do not place a key on the wireless charging pad and do not press the brake during the procedure.
If it does not work

Quick checks.

  • ✓If the code does not appear, wait at least one minute before starting the complete sequence again.
  • ✓Keep all doors closed and finish every step within 30 seconds.
  • ✓The code can appear after other instrument-cluster messages, so wait a few seconds before assuming the attempt failed.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2024 Ford Explorer Owner's Manual — Displaying the Master Access Code

Relevant section or page: Page 69. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.