Set Preferred Weekday and Weekend ZDX Charge Times
Prioritize home charging during selected time windows while keeping the scheduled departure target.
Charging schedules, range tools, battery conditioning, regenerative driving and hybrid energy features.
Each guide keeps its market, model-year, powertrain and equipment limits attached. A listed model does not imply the feature is standard on every trim.
Prioritize home charging during selected time windows while keeping the scheduled departure target.
Connect the 2024 Tonale eAWD's portable cordset in the official outlet-first order and verify its status before charging.
Select the Tonale eAWD plug-in hybrid calibration for sporty, balanced or electric-priority driving.
Choose whether the 2024 Tonale eAWD should preserve its present battery state or use engine power to raise it.
Increase regenerative deceleration when lifting off the accelerator while retaining responsibility for the final stop.
Park, open the charge port, insert the compatible connector fully and verify the charging indication before leaving.
Create and activate a departure-based charging plan, then confirm it is recognized after the cable is connected.
Use the steering-wheel paddles for three manual recuperation levels or choose automatic recuperation in the MMI.
Use the Charging menu or route to a DC station so the high-voltage battery reaches a more favorable temperature before arrival.
Start battery heat management from the Charging menu or let BMW navigation trigger it for a planned DC stop.
Download the eligible Electrify America charging contract in iDrive so a compatible station can authenticate the i7 when it is plugged in.
Route to a recognized DC charger for automatic battery preparation or start Pre-condition battery manually in the i7 Charging menu.
Select a DC destination in BMW navigation or manually request battery preparation before reaching the charger.
Clear the center-console pad, place a compatible phone screen-up and rotate it if charging does not begin.
Open Controls > See More Controls > Drive & Park and choose Off, Normal or High.
Set a Home Location, choose days, target charge level, ready time and optional cabin preconditioning.
Hold the steering-wheel paddle in Drive and modulate the accelerator to manage regenerative deceleration.
Choose Charge Now or Charge Later, set a weekday schedule and adjust the battery target from the Equinox EV Charging app.
Connect the Equinox EV safely, verify that charging begins and decode the blue, green or red charging-status indication.
Store up to three recurring start events in the Hybrid Electric App and choose whether charging should continue until full.
Program up to two recurring start/stop windows and choose Charge Until Full in the Hornet's Hybrid Electric App.
Start and end 240-volt charging without leaving the station cable on the ground.
Connect an equipped 2024 500e to a grounded 120-volt outlet in the official wall-first order.
Match the 500e's accelerator, range and climate strategy to the current trip.
Follow the 500e cluster prompts when battery temperature is outside its normal starting range.
Save up to three repeating charge windows in the 500e and verify the intended event is active.
Start charging immediately without deleting the 500e's saved weekly schedule.
Connect the 500e to a compatible DC station and verify the high-power session actually starts.
Activate the off-road one-pedal function with the trail-features button and switch directly between it and Trail Control when needed.
Put EV Coach in MyView and use its blue, white and green bars to understand electric operation and regenerative braking.
Create a location-based charging window, choose a target charge and schedule cabin and battery preconditioning for departure.
Reserve driving range so Pro Power Onboard stops before accessory use consumes the amount of battery you want to keep.
Enable 1-Pedal Drive from the Lightning's Controls menu and confirm its cluster indicator before relying on accelerator-release deceleration.
Identify the battery chemistry from the VIN and use Ford's different everyday charge guidance for standard-range LFP and extended-range NCM packs.
Save an AC charging location, prioritize lower-rate windows and precondition the cabin and battery for a scheduled departure.
Set a battery reserve, connect the V2L adapter and verify power before running compatible outdoor equipment.
Open the matching vehicle guide and read its availability note first. When the retail trim or package is not named by the official source, use the window sticker, manufacturer build record or the visible control in the vehicle.