Quick answer

Set the EV Charge Transfer reserve, attach dry compatible equipment to the V2L adapter and confirm the adapter light before use.

Before you start

Check that your vehicle has it.

Availability

Verified in the 2025 U.S.-market Niro EV digital owner's manual. The exterior V2L connector is equipment-dependent and does not apply to Niro Hybrid or Plug-in Hybrid.

Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified in the 2025 U.S.-market Niro EV digital owner's manual. The exterior V2L connector is equipment-dependent and does not apply to Niro Hybrid or Plug-in Hybrid.

  • 2025 Niro EV Electric models equipped with the exterior Vehicle-to-Load connector
Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Towing & power orientation diagram for Kia Niro
Towing & power orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Open EV Charge Transfer and set the minimum battery percentage to retain for driving.

  2. 02

    With dry hands, inspect the adapter, inlet and grounded appliance plug for damage, moisture or debris.

  3. 03

    Connect the appliance to the V2L outlet and close the outlet cover around the cord.

  4. 04

    Insert the V2L connector fully into the vehicle's charging inlet and press its switch.

  5. 05

    Confirm the operating light turns on before using the appliance; switch V2L off before disconnecting.

!

Important limits

  • V2L stops at the selected minimum charge and can stop because of overload or temperature protection.
  • Do not use wet, damaged, ungrounded or over-rated appliances and never touch the connector with wet hands.
  • External power consumption lowers available driving range.
If it does not work

Quick checks.

  • ✓If the light stays off, set the reserve below the current state of charge.
  • ✓If output stops, disconnect high-demand loads and check the cluster for a V2L warning.
  • ✓If a known-compatible appliance also fails, stop using the adapter and have an authorized Kia dealer inspect it.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Kia Niro EV Digital Owner's Manual — Vehicle to Load

Relevant section or page: Electric vehicle guide — EV menu — Vehicle to load (V2L). We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.