Quick answer

CrabWalk is engaged only at a stop or crawl speed with a still steering wheel and no active Super Cruise session; the display confirms when diagonal four-wheel steering is ready.

Before you start

Check that your vehicle has it.

Availability

Verified for the 2024 U.S.-market GMC HUMMER EV Pickup and SUV 2X/3X equipped with 4-Wheel Steer and CrabWalk.

Retail trim / version
2024 HUMMER EV Pickup 2X and 3X, 2024 HUMMER EV SUV 2X and 3X
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for the 2024 U.S.-market GMC HUMMER EV Pickup and SUV 2X/3X equipped with 4-Wheel Steer and CrabWalk.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Drive modes orientation diagram for GMC Hummer EV
Drive modes orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Move to a clear area, disengage Super Cruise and stop the vehicle or reduce speed to no more than 1.2 mph.

  2. 02

    Hold the steering wheel still and select CrabWalk in the Controls app, confirming the prompt; on vehicles with the dedicated four-wheel-steer control, use that control as shown in the vehicle.

  3. 03

    Wait for the CrabWalk indicator and the available surround-camera view to confirm engagement.

  4. 04

    Turn the steering wheel in the desired direction and proceed slowly while watching the vehicle corners and camera views.

  5. 05

    Select the CrabWalk control again to return to automatic four-wheel steering before normal driving.

!

Important limits

  • CrabWalk is a low-speed maneuvering aid, not a lane-change feature, and requires the driver to watch the entire path around the vehicle.
  • Super Cruise cannot remain active with CrabWalk.
  • CrabWalk operation is speed-limited; exceeding the system threshold causes it to disengage.
If it does not work

Quick checks.

  • ✓If activation is refused, reduce speed to 1.2 mph or less and stop moving the steering wheel.
  • ✓If the control remains unavailable, turn off Super Cruise and retry in a clear area.
  • ✓If CrabWalk drops out, reduce speed and re-engage only after the vehicle again meets the activation conditions.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

GMC Support — How to Use CrabWalk

We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.