Enable the Charging Planner and Route Through Charging Stops
Turn on Porsche Charging Planner in navigation, enter a destination and review the calculated stops, charge levels and charging time.
Charging schedules, range tools, battery conditioning, regenerative driving and hybrid energy features.
Each guide keeps its market, model-year, powertrain and equipment limits attached. A listed model does not imply the feature is standard on every trim.
Turn on Porsche Charging Planner in navigation, enter a destination and review the calculated stops, charge levels and charging time.
Create a departure in My Porsche, set the target state of charge, optionally precondition and send the timer to the Taycan.
Find a Porsche Charging Service station in the app, choose the plug and tap its EVSE-ID to authenticate.
Use the Rivian app to accept a utility-based recommendation or create your own recurring off-peak window.
Schedule the R1T around utility off-peak hours or enter a recurring charging window manually.
Choose a start-only or start-and-stop event, assign days, and save it for plugged-in charging while the Solterra is off.
Verify Powershare support and use the compatible Tesla Outlet Adapter and Gen 3 Mobile Connector where required.
Start the hybrid system, enable AC 120 V and keep the combined load at or below 2400 watts.
Request short, quiet low-load travel on battery power before the gasoline engine needs to run.
When the hybrid system is cold, pressing EV MODE immediately after READY appears can preserve the brief opportunity to select electric-only driving.
Request electric-only driving at low load, while understanding that temperature, speed, battery charge or defogging can block it.
Use myVW battery settings to hold the everyday target at 80% or temporarily raise it before a longer journey.
After one-time account activation, connect at a compatible station and verify that authentication and charging begin automatically.
Limit home-charging amperage and define overnight start and stop times from the EX30 charging settings.
Choose the EX30 regenerative-braking level from driving settings, Quick Controls or an assigned steering-wheel shortcut.
Enable ISO 15118 authentication, copy the EX40 provisioning identifier and install a supported charging contract certificate.
Create and activate an AC charging window that the EX40 automatically recognizes at the saved location.
Select full accelerator-release braking, camera-and-radar-dependent Auto behavior or normal coasting.
Save an AC amperage ceiling so the EX40 does not request more current than the verified circuit and charging equipment should provide.
Choose the high-voltage battery percentage where normal charging should stop and keep that target until it is changed again.
Park the plug-in hybrid, connect the AC source first and seat the vehicle connector until it locks and begins charging.
Distinguish cable detection, waiting, active charging, completion and a fault from the indicator beside the plug.
Select B to increase accelerator-release regenerative braking and use the brake whenever one-pedal deceleration is insufficient.
Park, connect the charging source first, insert the vehicle connector and confirm that the cable locks and charging starts.
Select B in the V60 plug-in hybrid to add accelerator-release braking and regenerative deceleration.
Use the port light to distinguish cable detection, active charging, completion and a charging fault.
Choose Hybrid, Pure, all-wheel drive, Off-road or Power according to battery level and road conditions.
Park the T8, connect the AC source first and seat the vehicle connector until it locks and charging begins.
Select B in the plug-in hybrid to add accelerator-release regenerative braking and possible full-stop behavior.
Choose Hybrid, Pure, Power, constant all-wheel drive or Off-road without mixing the T8 controls with the B5 mild-hybrid route.
End the T8 AC session by unlocking the vehicle, releasing the connector and disconnecting in the correct order.
Let the B5 engine switch off during a suitable stop and restart it by releasing the brake or pressing the accelerator.
Open the matching vehicle guide and read its availability note first. When the retail trim or package is not named by the official source, use the window sticker, manufacturer build record or the visible control in the vehicle.