Schedule Charging Around a Departure Time
Use the Q8 e-tron's MMI charging scheduler to define when the battery should be ready instead of relying only on immediate charging.
Preconditioning may depend on charging state, connected services or a departure schedule. The exact applicability and limitations remain visible on every guide.
Each guide keeps its market, model-year, powertrain and equipment limits attached. A listed model does not imply the feature is standard on every trim.
Use the Q8 e-tron's MMI charging scheduler to define when the battery should be ready instead of relying only on immediate charging.
Authorize engine-based preconditioning in iDrive, then start it from the My BMW App or with three presses of the key's lock button.
Use the Charging menu or route to a DC station so the high-voltage battery reaches a more favorable temperature before arrival.
Start battery heat management from the Charging menu or let BMW navigation trigger it for a planned DC stop.
Route to a recognized DC charger for automatic battery preparation or start Pre-condition battery manually in the i7 Charging menu.
Select a DC destination in BMW navigation or manually request battery preparation before reaching the charger.
Reconfirm the iDrive 8 preconditioning consent after a software update so remote cabin preparation works again.
Restore the iDrive consent setting that can be reset during a Remote Software Upgrade, then start climate preconditioning from the My BMW App.
Accept the X7's iDrive consent setting, then request a 15-minute climate run from the My BMW App or the key.
Set a Home Location, choose days, target charge level, ready time and optional cabin preconditioning.
Press the key-fob remote-start button twice to condition the Blazer EV cabin, preferably while the vehicle remains plugged in.
Warm or cool the 500e before a planned departure while preserving plugged-in energy when available.
Create a location-based charging window, choose a target charge and schedule cabin and battery preconditioning for departure.
Departure and Comfort can warm or cool the plugged-in Mustang Mach-E cabin and prepare its high-voltage battery before selected weekly departure times.
Save an AC charging location, prioritize lower-rate windows and precondition the cabin and battery for a scheduled departure.
Start the V6 from roughly 100 feet away so automatic climate control targets 72°F before entry.
Set a departure time, off-peak charging behavior and a cabin target that uses connected charger power.
Choose separate charge limits and let navigation precondition the battery before a selected DC fast charger.
Set a repeating departure time and temperature so a connected charger can prepare the battery and cabin.
Schedule a one-time blower cycle to release hot cabin air before returning to the vehicle.
Aim the Intelligent Key, lock the QX60, and hold the remote-start button within five seconds to precondition an equipped vehicle.
Set a departure time so the cabin is prepared for a single date or repeated weekday schedule.
Set a target temperature while plugged in so the EV6 conditions its cabin before departure without drawing that energy from the unplugged battery.
Set the departure time, charging window and target temperature so the plugged-in EV9 is charged and conditioned when needed.
Create a one-time or repeating departure event and choose climate preconditioning from the EV app.
Precondition the parked EQB for a one-time departure or a recurring weekly schedule.
Choose a maximum battery percentage and schedule a departure so charging and pre-entry climate control can be coordinated.
Configure Home or Work charging, a 10-percent-increment battery limit and a departure schedule for pre-entry climate control.
Set and activate a departure time so the electric Cooper prepares the cabin before the trip.
Start Battery preconditioning from Remote access before a DC stop so the Countryman SE can move toward a favorable charging temperature.
Enroll the vehicle in Mitsubishi Connect, then use Remote Climate Start and temperature control before entering.
Set a departure time, selected weekdays and cabin temperature so the ARIYA can precondition before you leave.
Lock the Rogue, then hold the remote-start button within five seconds so the engine and automatic climate logic can run before entry.
Lock the Sentra, then hold the remote-start button within five seconds to start the engine and let the equipped climate system precondition the cabin.
Create a departure timer in PCM or My Porsche, choose a battery target and enable remote climate control before sending the plan to the Macan Electric.
Set an immediate minimum charge in a general or location profile, then use a timer for the final target and optional cabin preconditioning.
Open the matching vehicle guide and read its availability note first. When the retail trim or package is not named by the official source, use the window sticker, manufacturer build record or the visible control in the vehicle.