Set Preferred Weekday and Weekend ZDX Charge Times
Prioritize home charging during selected time windows while keeping the scheduled departure target.
Charging controls can live in the vehicle, mobile app or both. These guides identify the supported interface, model years and any connected-service or location requirements.
Each guide keeps its market, model-year, powertrain and equipment limits attached. A listed model does not imply the feature is standard on every trim.
Prioritize home charging during selected time windows while keeping the scheduled departure target.
Create and activate a departure-based charging plan, then confirm it is recognized after the cable is connected.
Use the Q8 e-tron's MMI charging scheduler to define when the battery should be ready instead of relying only on immediate charging.
Set a Home Location, choose days, target charge level, ready time and optional cabin preconditioning.
Choose Charge Now or Charge Later, set a weekday schedule and adjust the battery target from the Equinox EV Charging app.
Store up to three recurring start events in the Hybrid Electric App and choose whether charging should continue until full.
Program up to two recurring start/stop windows and choose Charge Until Full in the Hornet's Hybrid Electric App.
Save up to three repeating charge windows in the 500e and verify the intended event is active.
Start charging immediately without deleting the 500e's saved weekly schedule.
Create a location-based charging window, choose a target charge and schedule cabin and battery preconditioning for departure.
Choose the cabin-temperature strategy and supported heated-seat and heated-steering-wheel behavior used for remote starts and departure times.
Departure and Comfort can warm or cool the plugged-in Mustang Mach-E cabin and prepare its high-voltage battery before selected weekly departure times.
Save an AC charging location, prioritize lower-rate windows and precondition the cabin and battery for a scheduled departure.
Choose an off-peak window and decide whether the IONIQ 5 may continue charging afterward to reach its target.
Choose the traction-battery reserve at which Vehicle-to-Load power automatically turns off.
Set a departure time, off-peak charging behavior and a cabin target that uses connected charger power.
Choose separate charge limits and let navigation precondition the battery before a selected DC fast charger.
Choose the minimum traction-battery percentage that stops Vehicle-to-Load output automatically.
Set a repeating departure time and temperature so a connected charger can prepare the battery and cabin.
Choose off-peak behavior, AC input current and separate AC/DC battery targets from the Electric Vehicle screen.
Schedule AC/portable charging for low-cost hours and use the charge-door button when an immediate session is needed.
Set a departure time so the cabin is prepared for a single date or repeated weekday schedule.
Choose a 40–100% battery target in five-percent steps and optionally apply it to only the next charge.
Set a target temperature while plugged in so the EV6 conditions its cabin before departure without drawing that energy from the unplugged battery.
Set the departure time, charging window and target temperature so the plugged-in EV9 is charged and conditioned when needed.
A charging-door button override starts one immediate AC or portable-charger session while preserving the EV9's saved charging schedule.
A two-second scheduled-charge release provides a one-time immediate charge while preserving the saved charging schedule.
The scheduled-charge release temporarily starts an AC session now while leaving the Plug-in Hybrid's stored schedule available for later.
Use the release button for a one-time immediate AC charge without permanently deleting the Plug-in Hybrid's saved charging schedule.
Create a one-time or repeating departure event and choose climate preconditioning from the EV app.
Create up to 15 repeating AC-charge events from the center display and confirm the charge-port indicator flashes.
Create a repeating PHEV charge event by fixed start time or by the time the battery should be ready.
Delay home charging to a chosen off-peak window while keeping the location and target visible on the Pilot Panel.
Choose a routine 50–80 percent Daily target or a higher Distance target before a long trip.
Enable Charge When Connected to bypass the active timer for the current charge session without deleting the schedule.
Mazda Connect stores up to seven charge schedules with start, end, repeat-day and charge-limit settings.
Open the matching vehicle guide and read its availability note first. When the retail trim or package is not named by the official source, use the window sticker, manufacturer build record or the visible control in the vehicle.