Configure the Integra Head-Up Display
Choose the projected information, brightness and vertical position on the Technology Package's windshield display.
Seats, driver memory, climate controls, preconditioning, mirrors and everyday cabin conveniences.
Each guide keeps its market, model-year, powertrain and equipment limits attached. A listed model does not imply the feature is standard on every trim.
Choose the projected information, brightness and vertical position on the Technology Package's windshield display.
Remove the second-row center section to create a wide pass-through to the third row.
Use Integrated Dynamics or the True Touchpad Interface to choose among 27 cabin-lighting schemes or pin one favorite.
Retain hydraulic brake pressure after stopping so the pedal can be released at a light or on a hill.
Store the equipped Giulia's driver-seat and side-mirror positions under one of three memory buttons.
Store the equipped Stelvio's driver-seat and side-mirror positions in one of three profiles.
Adjust the supported driver controls, press SET and assign the position to a numbered memory button.
Adjust the supported driver controls, press SET and then a numbered memory key to store a reusable driving position.
Use the Q8 e-tron's MMI charging scheduler to define when the battery should be ready instead of relying only on immediate charging.
Store two driver profiles plus an exit position and optionally enable automatic entry and exit recall.
Store two driver seat-and-mirror profiles, add an exit position, and enable automatic recall if desired.
Choose a cluster layout with the steering-wheel thumbwheel and send selected maintenance, gauge or trip cards to the cluster.
Use the instrument-cluster control panel to choose Gauge, Energy, Map or Clean, then add selected Vehicle Status cards to the display.
Pull and hold the left steering-wheel paddle; pulling farther requests more regenerative slowing, then releasing ends the request.
Open Controls > Drive & Park, turn on One-Pedal Driving and confirm its indicator before practicing accelerator-release deceleration.
Use the end button for Park and the brake-plus-pull motions on the column lever for Reverse, Neutral and Drive.
Use the Drive Modes control to personalize available acceleration, brake, steering and motor-sound behavior instead of choosing one fixed preset.
The 2024 Blazer EV powers on when the belted driver presses the brake, and Extend Mode can keep it on after the driver exits.
Press the key-fob remote-start button twice to condition the Blazer EV cabin, preferably while the vehicle remains plugged in.
Store separate driver profiles with the door-mounted SET and 1 or 2 buttons, plus an exit position when equipped.
Open Drive & Park controls to enable One-Pedal Driving, choose its braking level and optionally add its quick-access button.
Hold the paddle behind the left side of the steering wheel for temporary regenerative deceleration, then release it to resume normal driving.
Use the Energy app's Charging Options to stop at a selected battery level and preview the resulting estimated range.
Press the lowest button on the console shift-control bank to make accelerator lift manage most routine slowing and stopping.
Use the key-fob lock and remote-start sequence once for a 20-minute session, then repeat it after 30 seconds to extend the same session once.
Store the current position as Home so the Bolt EV can apply home charging preferences there and charge immediately when away.
Open Charging Options and move the Target Charge Level control to stop charging at a chosen level instead of always filling the battery.
Press the dedicated console button to use accelerator-pedal lift for regenerative deceleration in both Drive and Reverse.
Let the Equinox EV power on with the key in the cabin, then use Extend Mode when the vehicle must remain on after the driver exits.
Select the 2-inch-lower height manually or enable automatic lowering when the Tahoe is shifted into Park.
Store two driver settings, create a separate exit position and link automatic entry and exit recall to vehicle settings.
Store two driver positions plus a separate easy-exit position, then enable automatic recall in the center display.
Clear the second-row area, release the Smart Slide seat and lock it back into place after passengers enter or exit.
Clear the charging pad, place a compatible phone screen-up and rotate it if the charging indicator does not appear.
Store seat, mirror and radio preferences in memory 1 or 2 and optionally recall them from a linked key fob.
Fold an equipped Stow 'n Go second-row seat into its floor bin and latch the load floor flat.
Open the matching vehicle guide and read its availability note first. When the retail trim or package is not named by the official source, use the window sticker, manufacturer build record or the visible control in the vehicle.