Quick answer

Close the driver's door, fasten the driver's belt and press the Brake Hold switch; stop firmly in D, M or N, then press the accelerator in D or M to release the hold.

Before you start

Check that your vehicle has it.

Availability

Verified in the 2025 U.S. Corolla Cross gasoline owner's manual. Brake Hold requires a closed driver's door, fastened driver's belt and released parking brake.

Retail trim / version
L gasoline, LE gasoline, XLE gasoline, 2025 Corolla Cross gasoline grades
Required equipment / service
Electronic parking brake and Brake Hold switch
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • Electronic parking brake and Brake Hold switch
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified in the 2025 U.S. Corolla Cross gasoline owner's manual. Brake Hold requires a closed driver's door, fastened driver's belt and released parking brake.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Brakes and parking orientation diagram for Toyota Corolla Cross
Brakes and parking orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Close the driver's door, fasten the driver's seat belt and make sure the parking brake is released.

  2. 02

    Press the Brake Hold switch and confirm the green standby indicator.

  3. 03

    With D, M or N selected, depress the brake pedal to stop; confirm the yellow operated indicator before releasing the pedal.

  4. 04

    In D or M, press the accelerator smoothly to release Brake Hold and move away.

!

Important limits

  • Brake Hold is not a parking substitute and may not hold the vehicle on a steep or slippery surface.
  • After about 3 minutes of holding, the electronic parking brake is applied automatically.
If it does not work

Quick checks.

  • ✓If the green standby indicator does not illuminate, recheck the door, seat belt and parking-brake conditions.
  • ✓If a Brake Hold malfunction message appears or its indicator flashes, keep the brake pedal depressed, park safely and arrange Toyota dealer inspection.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Toyota Corolla Cross Owner's Manual — Brake Hold

Relevant section or page: Pages 177–179. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.