Quick answer

Press and release the desired HomeLink button, hold the handheld transmitter 1–3 inches from the mirror and transmit until the indicator turns green; rolling-code openers then require the motor's Learn button and up to three 2-second HomeLink presses.

Before you start

Check that your vehicle has it.

Availability

Verified for 2025 U.S. Camry Hybrid vehicles equipped with HomeLink. Device compatibility and the location or name of the garage motor's Learn button depend on the opener.

Required equipment / service
HomeLink buttons and compatible garage-door remote, Camry Hybrid equipped with HomeLink
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • HomeLink buttons and compatible garage-door remote
  • Camry Hybrid equipped with HomeLink
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for 2025 U.S. Camry Hybrid vehicles equipped with HomeLink. Device compatibility and the location or name of the garage motor's Learn button depend on the opener.

  • 2025 Camry Hybrid models equipped with HomeLink
Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Garage access orientation diagram for Toyota Camry
Garage access orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Park outside the garage, clear people and objects from the door, and install a fresh battery in the handheld transmitter.

  2. 02

    Press and release the HomeLink button to program and confirm that its indicator flashes orange.

  3. 03

    Hold the transmitter 1 to 3 inches from the mirror and hold its button until HomeLink flashes rapidly green for rolling code or stays solid green for fixed code.

  4. 04

    For a rolling-code opener, press and release the motor's Learn or Smart button, then within 30 seconds hold the programmed HomeLink button for 2 seconds and release; repeat up to three times.

  5. 05

    Test the newly programmed HomeLink button with the garage opening clear.

!

Important limits

  • Do not program an opener that lacks required safety-stop and reverse features.
  • Programming can move the door or gate; keep people, vehicles and objects clear.
If it does not work

Quick checks.

  • ✓If the indicator never changes from orange, move the transmitter within the 1–3 inch range and retry with a fresh transmitter battery.
  • ✓If HomeLink flashes rapidly green but the door does not move, complete the opener's rolling-code Learn sequence within 30 seconds.
Owner feedback

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Toyota Camry Owner's Manual — HomeLink

Relevant section or page: Pages 361–364. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.