Quick answer

Park with the wipers off, choose Controls > Service > Wiper Service Mode, replace one blade at a time and turn the mode off when finished.

Before you start

Check that your vehicle has it.

Availability

Verified for the 2025 U.S.-market Model 3; blade connector and length must match the original equipment.

Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for the 2025 U.S.-market Model 3; blade connector and length must match the original equipment.

  • 2025 Model 3 electric lineup using Tesla-compatible replacement blades
Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Wiper maintenance orientation diagram for Tesla Model 3
Wiper maintenance orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Shift into Park, switch the wipers off and touch Controls > Service > Wiper Service Mode.

  2. 02

    Lift one arm only far enough to access the blade and place a towel between the arm and windshield.

  3. 03

    Press the blade locking tab and slide the old blade away from the arm.

  4. 04

    Slide the correct replacement onto the arm until it clicks, then perform a gentle push-pull check.

  5. 05

    Lower the arm carefully and turn Wiper Service Mode off to return both wipers to Park.

!

Important limits

  • The arms do not lock upright and must not be lifted beyond their intended travel.
  • An unprotected arm can spring against and crack the windshield.
  • Use identical compatible blades; a loose blade can detach and cause serious damage.
If it does not work

Quick checks.

  • ✓If the wipers do not move to service position, confirm Park and that normal wipers are off.
  • ✓If the new blade will not click, compare its connector with the original.
  • ✓Do not operate the wipers until both blades pass the push-pull check.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

Tesla Model 3 Owner's Manual — Windshield Wiper Blades, Jets and Fluid

Relevant section or page: Replacing Wiper Blades. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.