Quick answer

With a calibrated connected trailer, stop in Park with the brake held, press the TRSC button, shift to Reverse, remove hands from the wheel and turn the knob toward the desired trailer direction.

Before you start

Check that your vehicle has it.

Availability

Verified for 2025 Ram 1500 gasoline and eTorque variants equipped with TRSC and a compatible calibrated trailer.

Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for 2025 Ram 1500 gasoline and eTorque variants equipped with TRSC and a compatible calibrated trailer.

  • 2025 Ram 1500 gasoline and eTorque models equipped with Trailer Reverse Steering Control
Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Trailer assistance orientation diagram for Ram 1500
Trailer assistance orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Connect the trailer and its electrical wiring, secure the cable outside the rear-camera view, and complete calibration if the cluster requests it.

  2. 02

    Stop, shift to Park, hold the brake and press the TRSC activation button above the knob.

  3. 03

    When directed, shift to Reverse and wait for the active message.

  4. 04

    Remove hands from the steering wheel, back slowly and turn the TRSC knob in the direction the trailer should go; keep the knob centered for straight travel.

  5. 05

    Control accelerator and brake yourself, watch mirrors/camera continuously, and cancel by stopping and selecting Park or pressing TRSC.

!

Important limits

  • TRSC assists steering only; the driver remains responsible for speed, braking, clearance and trailer angle.
  • The rear camera must be clean and the tailgate upright and fully latched.
  • The feature can cancel for excessive speed, driver steering input, lost trailer tracking, an open driver door/unbuckled belt or an approaching jackknife.
If it does not work

Quick checks.

  • ✓For a Calibrate Trailer message, drive the manual's straight/90-degree/straight calibration pattern in a safe open area.
  • ✓Clean the rear camera, straighten the trailer and remove wiring from its image if tracking is lost.
  • ✓Stop immediately at a red jackknife warning; pull forward to straighten rather than forcing the maneuver.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Ram 1500 Owner's Manual — Trailer Reverse Steering Control

Relevant section or page: Starting And Operating — Trailer Reverse Steering Control, If Equipped. We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.