Quick answer

Open Home > EQ > Charging, choose Home or Work, enable location selection, then set the charge limit and an individual or weekly departure time.

Before you start

Check that your vehicle has it.

Availability

Verified for the 2024 U.S. EQB MBUX charging menu; Home and Work location behavior requires position services and a saved program.

Required equipment / service
EQB 250+, EQB 300 4MATIC and EQB 350 4MATIC with MBUX charging settings
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • EQB 250+, EQB 300 4MATIC and EQB 350 4MATIC with MBUX charging settings
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for the 2024 U.S. EQB MBUX charging menu; Home and Work location behavior requires position services and a saved program.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Electric charging orientation diagram for Mercedes-Benz EQB
Electric charging orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    In MBUX open Home > EQ > Charging and select the Home, Work or Standard charging program.

  2. 02

    For Home or Work, enable Select Based on Location while parked at the address to store the current position.

  3. 03

    Open the maximum state-of-charge setting and choose the desired battery limit in the available increments.

  4. 04

    Select Departure Time, add an individual time or Week Profile, and mark the required repeat days.

  5. 05

    If desired, enable automatic cable unlocking at the target state of charge and review any AC charging pauses.

!

Important limits

  • AC charging can be delayed or paused to meet the selected departure plan; DC charging starts without delay.
  • A lower maximum state of charge stops charging at that limit even when the vehicle remains connected.
  • Location-based selection depends on the stored position and may not trigger if location data is unavailable.
If it does not work

Quick checks.

  • ✓If the wrong program appears, park at the intended address and save Select Based on Location again.
  • ✓If the departure estimate is not shown, confirm a valid time and weekday are active.
  • ✓If the cable remains locked, unlock the vehicle or use the charging menu's stop/unlock control after charging ends.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2024 Mercedes-Benz EQB Owner's Manual — Configuring the Charging Settings

Relevant section or page: Driving and parking, pp. 185–187. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.