Quick answer

Buckle up, close the driver's door, release the parking brake, press AUTO HOLD and wait for the active HOLD indicator before taking your foot off the pedal.

Before you start

Check that your vehicle has it.

Availability

Verified in the 2025 CX-70 manual and scoped to the cataloged 3.3-liter mild-hybrid trims, separate from plug-in-hybrid charging and drive-mode guides.

Retail trim / version
3.3 Turbo Preferred, 3.3 Turbo Premium, 3.3 Turbo Premium Plus, 3.3 Turbo S Premium, 3.3 Turbo S Premium Plus
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified in the 2025 CX-70 manual and scoped to the cataloged 3.3-liter mild-hybrid trims, separate from plug-in-hybrid charging and drive-mode guides.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Driver assistance orientation diagram for Mazda CX-70
Driver assistance orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Start the hybrid system, fasten the driver's seat belt, close the driver's door and release the parking brake.

  2. 02

    Press AUTO HOLD and verify standby indication.

  3. 03

    Bring the CX-70 to a complete stop with the brake and wait for active HOLD indication.

  4. 04

    Lift off the brake only after HOLD is active and continue watching surrounding traffic.

  5. 05

    Press the accelerator to release or use the switch to cancel standby when no longer needed.

!

Important limits

  • AUTOHOLD is a temporary brake aid and never replaces the parking brake.
  • Do not depend on it on steep or slippery surfaces.
  • The electric parking brake may apply after a long hold of about ten minutes or when the power system is switched off.
If it does not work

Quick checks.

  • ✓If standby does not engage, buckle the driver, close the door and release the parking brake.
  • ✓If active HOLD does not appear, keep the brake applied.
  • ✓If a brake warning remains, cancel the feature and seek qualified service.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Mazda CX-70 Digital Owner's Manual — AUTOHOLD

Relevant section or page: AUTOHOLD — How to Use AUTOHOLD. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.