Quick answer

Enable the setting in Mazda Connect, leave with the key, close every opening, wait for the first beep and walk out of range for the lock confirmation.

Before you start

Check that your vehicle has it.

Availability

Verified in the 2025 CX-70 manual and restricted here to the U.S. 3.3-liter mild-hybrid lineup, with the Mazda Connect setting enabled.

Retail trim / version
3.3 Turbo Preferred, 3.3 Turbo Premium, 3.3 Turbo Premium Plus, 3.3 Turbo S Premium, 3.3 Turbo S Premium Plus
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified in the 2025 CX-70 manual and restricted here to the U.S. 3.3-liter mild-hybrid lineup, with the Mazda Connect setting enabled.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Key fob & access orientation diagram for Mazda CX-70
Key fob & access orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Park and enable proximity or walk-away auto locking in Mazda Connect Settings.

  2. 02

    Switch the CX-70 off, exit and carry the registered key.

  3. 03

    Close all doors and the liftgate and wait for the first beep.

  4. 04

    Walk outside the operating range and wait for the second lock confirmation.

  5. 05

    Verify the vehicle is locked before leaving.

!

Important limits

  • Another registered key in the cabin can prevent expected auto locking.
  • Leaving range before every opening closes can interrupt the sequence.
  • Confirm the actual lock state instead of relying only on a beep.
If it does not work

Quick checks.

  • ✓If the CX-70 stays unlocked, close every opening again and remove spare keys from the cabin.
  • ✓If no initial beep occurs, check the Mazda Connect setting and key battery.
  • ✓If the feature changed after service or a reset, restore the personalization setting.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Mazda CX-70 Digital Owner's Manual — Proximity Auto Lock

Relevant section or page: Doors — Convenient Ways to Use the Doors. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.