Quick answer

Buckle up, close the driver's door, release the parking brake, select AUTO HOLD, and keep the brake pressed until the active HOLD indicator confirms engagement.

Before you start

Check that your vehicle has it.

Availability

Verified in the 2025 CX-50 manual and scoped to the U.S. gasoline trims listed; this record does not merge in the catalog's separate Hybrid powertrain.

Retail trim / version
2.5 S Select, 2.5 S Preferred, 2.5 S Premium, 2.5 Turbo Meridian Edition, 2.5 Turbo Premium, 2.5 Turbo Premium Plus
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified in the 2025 CX-50 manual and scoped to the U.S. gasoline trims listed; this record does not merge in the catalog's separate Hybrid powertrain.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Driver assistance orientation diagram for Mazda CX-50
Driver assistance orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    With the engine operating, fasten the driver's belt, close the driver's door and release the parking brake.

  2. 02

    Press AUTO HOLD and verify its standby indicator.

  3. 03

    Stop completely with the brake pedal and wait for the active HOLD indication.

  4. 04

    Remove your foot from the brake only after that active indication appears and continue watching traffic.

  5. 05

    Press the accelerator to release the hold, or cancel standby with the AUTO HOLD switch when appropriate.

!

Important limits

  • AUTOHOLD does not replace active braking or the parking brake.
  • Do not rely on it on steep or slippery surfaces where tire grip may be insufficient.
  • The electric parking brake may apply after about ten minutes of holding or when the engine is switched off.
If it does not work

Quick checks.

  • ✓If standby is unavailable, close the driver's door, buckle the belt and release the parking brake.
  • ✓If the active indicator does not illuminate, keep the brake pedal depressed.
  • ✓If a brake-system warning persists, cancel the function and seek qualified service.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Mazda CX-50 Digital Owner's Manual — AUTOHOLD

Relevant section or page: AUTOHOLD — How to Use AUTOHOLD. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.