With the Grecale parked outside and ignition ON, train a HomeLink button from the handheld transmitter, then press the opener's Learn/Training button and return within 30 seconds to press the programmed HomeLink button for two seconds twice.
Check that your vehicle has it.
Verified for the 2024 U.S.-market Grecale GT mild-hybrid configuration when the three-button HomeLink transmitter is equipped.
- Required equipment / service
- U.S.-market Grecale GT 2.0 L4 MHEV equipped with HomeLink
Does the documented scope match your car?
This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.
Published availability and qualifications
Verified for the 2024 U.S.-market Grecale GT mild-hybrid configuration when the three-button HomeLink transmitter is equipped.
Know what kind of control to look for.
This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.
Step by step.
- 01
Park outside the garage, clear people and objects from the door path, set ignition to ON and leave the engine off.
- 02
For first-time setup only, hold outside HomeLink buttons I and III until the indicator flashes after about 20 seconds, then release.
- 03
Hold the handheld transmitter 1–3 in (3–8 cm) from the desired HomeLink button and hold both buttons until the HomeLink light flashes quickly.
- 04
At the garage-door motor, press and release its Learn or Training button.
- 05
Within 30 seconds, return to the vehicle and press the programmed HomeLink button for two seconds, release it and repeat once.
- 06
If the door still does not activate, perform one more two-second press and release.
Important limits
- Use only an opener with the required stop-and-reverse safety function.
- Do not run the engine inside the garage while programming.
- Erase all channels with buttons I and III only for first-time setup, not when adding another device.
Quick checks.
- ✓Install a fresh battery in the handheld transmitter and retry at several distances within 1–3 in.
- ✓Hold the two training buttons for at least 15 seconds on each attempt.
- ✓Repeat the rolling-code synchronization and use the optional third two-second press if the first two do not activate the door.
What happened on your vehicle?
Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.
2024 Maserati Grecale GT Owner's Manual — HomeLink
Relevant section or page: Understanding the Vehicle, pages 51–53 — HomeLink. We use the written official source to determine the steps and applicability shown above.
Reviewed with a visible trail.
Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.
- Published
- Last modified
- Source checked
Guide change history
- Initial verified publication.