Quick answer

With the engine running on level ground, open Vehicle > Settings > Suspension and turn Tire/Jack Mode on before lifting or hitch adjustment.

Before you start

Check that your vehicle has it.

Availability

Verified for 2025 Grand Wagoneer/Grand Wagoneer L gasoline models equipped with Quadra-Lift; not applicable to coil-spring suspension.

Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for 2025 Grand Wagoneer/Grand Wagoneer L gasoline models equipped with Quadra-Lift; not applicable to coil-spring suspension.

  • 2025 Grand Wagoneer and Grand Wagoneer L gasoline models equipped with Quadra-Lift air suspension
Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Air suspension orientation diagram for Jeep Grand Wagoneer
Air suspension orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Park on a level, firm surface, select Park, keep the engine running and close all doors.

  2. 02

    Confirm the suspension is at Normal Ride Height.

  3. 03

    On Uconnect, open Vehicle, Settings, Suspension and enable Tire/Jack Mode.

  4. 04

    Confirm the instrument cluster reports the mode before placing a jack or adjusting a weight-distributing hitch.

  5. 05

    When work is complete and the vehicle is safely on its wheels, deselect Tire/Jack Mode and verify Normal Ride Height returns.

!

Important limits

  • Tire/Jack Mode disables automatic leveling; enable it before lifting the vehicle.
  • The mode cancels if the vehicle is driven above 5 mph (8 km/h).
  • Use only approved jacking points and follow the full jacking warnings; the touchscreen setting alone does not make lifting safe.
If it does not work

Quick checks.

  • ✓If the setting is absent, verify the vehicle has Quadra-Lift.
  • ✓If the mode cancels during hitch setup, stop, return to Normal Ride Height and restart the procedure.
  • ✓Do not jack the vehicle if the cluster does not confirm the mode or shows a suspension fault.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Jeep Wagoneer/Grand Wagoneer Owner's Manual — Tire/Jack Mode

Relevant section or page: Quadra-Lift Air Suspension Modes and Recommended Distribution Hitch Adjustment. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.