Quick answer

The 2024 Acadia's standard AutoSense Power Liftgate opens in Park when Open Only is enabled and a driver carrying the fob approaches from beyond 10 feet, enters the 3-foot zone and remains for four chimes.

Before you start

Check that your vehicle has it.

Availability

The official 2024 Acadia feature guide lists AutoSense Power Liftgate as standard on Elevation, AT4 and Denali. The feature must be enabled and the vehicle must be in Park.

Retail trim / version
2024 Acadia Elevation, 2024 Acadia AT4, 2024 Acadia Denali
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

The official 2024 Acadia feature guide lists AutoSense Power Liftgate as standard on Elevation, AT4 and Denali. The feature must be enabled and the vehicle must be in Park.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

AutoSense liftgate orientation diagram for GMC Acadia
AutoSense liftgate orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    With the vehicle on and in Park, select Vehicle Settings > Comfort and Convenience > Hands-Free Exterior Storage Access > Open Only.

  2. 02

    Carry the key fob and begin more than 10 feet from the rear of the Acadia.

  3. 03

    Approach to within about 3 feet of the liftgate and remain there while the chimes sound and exterior lights flash.

  4. 04

    Stay in the zone through the fourth chime to let the liftgate open, or cancel with the liftgate button, touchpad or by stepping away.

!

Important limits

  • AutoSense opens the liftgate but does not automatically close it when the driver walks away.
  • A properly connected trailer disables AutoSense; GMC recommends disabling the feature before attaching a trailer.
If it does not work

Quick checks.

  • ✓If the fob has remained within 10 feet for more than two minutes, unmute it by pressing a fob button, using an exterior handle switch, or opening and closing a door.
  • ✓After a successful opening, move at least 10 feet away for more than 20 seconds before attempting another approach.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

GMC Support — How to Operate the AutoSense Power Liftgate

We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.