Quick answer

Open the liftgate at least halfway, stop and position it with the liftgate-mounted control, then hold that control until the hazard flashers and tone confirm the height.

Before you start

Check that your vehicle has it.

Availability

Verified for the 2025 Explorer equipped with a hands-free power liftgate; it does not apply to a manual liftgate.

Required equipment / service
hands-free power liftgate
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • hands-free power liftgate
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for the 2025 Explorer equipped with a hands-free power liftgate; it does not apply to a manual liftgate.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Cargo & utility orientation diagram for Ford Explorer
Cargo & utility orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Park with clear overhead space and open the hands-free power liftgate at least halfway.

  2. 02

    Press the liftgate-mounted control at the desired area to stop movement, then adjust the stopped gate manually if needed.

  3. 03

    Press and hold that same liftgate-mounted control until the hazard flashers flash and a tone sounds.

  4. 04

    Close and reopen the liftgate to confirm it stops at the programmed height.

!

Important limits

  • The liftgate must be at least half open before the height can be saved.
  • Only the control on the liftgate programs the position.
  • The saved position remains until reprogrammed, including after a battery disconnect.
If it does not work

Quick checks.

  • ✓If there is no flash or tone, raise the gate above halfway and hold the liftgate control again.
  • ✓If the gate reverses, remove the obstruction and retry.
  • ✓If it only unlatches, verify power-liftgate operation is enabled.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Ford Explorer Owner's Manual — Setting the Liftgate Opening Height

We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.