Quick answer

Enable AutoSense in Vehicle Settings, then manually place the open liftgate at the desired height and hold its interior close button until the flash-and-beep confirmation.

Before you start

Check that your vehicle has it.

Availability

Verified for 2025 Enclave vehicles with the factory power liftgate and AutoSense equipment. Confirm the interior close button and AutoSense setting are present.

Required equipment / service
Enclave equipped with the power liftgate and AutoSense hands-free access
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • Enclave equipped with the power liftgate and AutoSense hands-free access
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for 2025 Enclave vehicles with the factory power liftgate and AutoSense equipment. Confirm the interior close button and AutoSense setting are present.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Cargo & utility orientation diagram for Buick Enclave
Cargo & utility orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Open the power liftgate and manually move it to a safe height below any garage obstruction.

  2. 02

    Press and hold the button beside the interior liftgate pull handle until the turn signals flash and a beep confirms the height is saved.

  3. 03

    Open Settings > Vehicle > Comfort and Convenience and make sure AutoSense is enabled if automatic opening is desired.

  4. 04

    With the liftgate closed, stand with the key fob within 3 feet of the rear for about 3 seconds and listen for four warning beeps before it opens.

  5. 05

    To toggle AutoSense from the liftgate, open it and hold the exterior handle touchpad until the taillights flash.

!

Important limits

  • Keep people and objects clear when the four pre-opening beeps sound.
  • The saved height limits opening clearance but does not detect every overhead obstacle.
If it does not work

Quick checks.

  • ✓If the height is not retained, repeat the hold until both the turn-signal flash and beep occur.
  • ✓If AutoSense opens unexpectedly or is unwanted, disable it in Vehicle Settings or use the documented exterior-touchpad toggle.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

Getting to Know Your 2025 Buick Enclave - AutoSense Power Liftgate and Height

Relevant section or page: 9. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.