Quick answer

With the vehicle on, hold the transmitter 1–3 inches from the chosen HomeLink button and hold both buttons until the indicator becomes steady or rapidly flashing.

Before you start

Check that your vehicle has it.

Availability

Verified for 2024 Tonale eAWD models equipped with the three-button HomeLink garage-door transmitter.

Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for 2024 Tonale eAWD models equipped with the three-button HomeLink garage-door transmitter.

  • 2024 Tonale eAWD plug-in hybrid models equipped with HomeLink
Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Garage access orientation diagram for Alfa Romeo Tonale eAWD
Garage access orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Park outside the garage, turn the vehicle on and hold the handheld transmitter 1–3 inches from the desired HomeLink button.

  2. 02

    Press and hold both the HomeLink button and handheld-transmitter button.

  3. 03

    For non-rolling code, wait for a steady indicator; for rolling code, wait for slow flashing to become rapid, then release.

  4. 04

    For rolling code, press and release the opener motor's LEARN or TRAIN button, then press the vehicle HomeLink button three times for two seconds each.

  5. 05

    Test the programmed button with the door path clear.

!

Important limits

  • Program outside the garage and keep people and objects clear of the moving door.
  • Holding the two outside HomeLink buttons for 20 seconds erases every channel; an individual channel cannot be erased.
  • Rolling-code openers require the motor-side LEARN or TRAIN step.
If it does not work

Quick checks.

  • ✓Move the handheld transmitter within the 1–3 inch range and replace its battery if the indicator does not change.
  • ✓Confirm whether the opener uses a rolling code and complete its timed motor-side step.
  • ✓Avoid erasing all channels unless a full reset is actually intended.
Owner feedback

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2024 Alfa Romeo Tonale Quick Start Guide — HomeLink

Relevant section or page: Garage Door Opener — Programming Your HomeLink Garage Door Opener. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.